Skip to main content


CLAY coating is a decorative coating, fine clay-based interior finish, with a slightly grainy appearance.

It creates a velvety, matte, fine texture if crushed with a stainless-steel trowel when drying.

 

It can be used in thick layers to smooth interior rustic surfaces. To prevent "tightening" of the coating when drying, apply with a stainless-steel trowel to achieve a smoother, elegant effect.  Due to its breathability characteristics, the product is particularly suited to smoothing uneven surfaces in the application of lime-based finishes of the Colorare line.

  • High environmental quality 100% Natural
  • Suitable for interior walls only.
  • Off-white powder form 
  • Tools can be cleaned with soap and water.
  • VOC: 0.00 gms/liter. 
  • Coverage: 1.5 to 2 kg per m2 


CLAY coating is available in the following colours (details below)


Preparing your surface: For previously painted surfaces, it is recommended to prepare the surface with TEXTURED base coat product before applying CLAY coating


Preparing & Mixing the CLAY coating: If adding pigment, add the dry pigment directly into the bucket. Dry mix the pigment with the clay powder until the components are mixed thoroughly. Add 30 to 35% clean water into the bucket and mix with a low-speed blender for a few minutes until a homogeneous dough is obtained. Prepare the product 1/2 hour before application.


Applying CLAY coating to your prepared surface: Apply using a stainless-steel trowel in two layers. Let each layer dry for 8-12 hours.


 Made in Italy.

   


Technical Sheet Safety Data Sheet


Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.

CLAY coating

from $14.95 CAD